Pellet Stove Furnace
Pellet stoves can be used as a secondary heating source or, with proper venting, a primary heating option. They are available as freestanding models or as fireplace inserts. They can give the appearance of a traditional wood-burning fire.
The auger moves pellets from the hopper to the combustion chamber, where they are ignited and generate heat. Sensors are able to monitor the flame and alter the speed of operation in order to maintain a desired temperature in the room.
1. Energy Efficiency
Pellet stoves are a renewable, non-toxic fuel that is made from compressed sawdust as well as other materials. They are usually disposed of in landfills, but can also be used to create a clean, efficient source of heat. They aid homeowners in reducing their energy usage, and therefore greenhouse gas emissions. Many owners of pellet stoves have reported that they've recouped their initial investment within just a few years through lower heating costs.
Pellets are extremely compressed and more dense than natural wood, making them more efficient to burn. They also produce less creosote than traditional wood-burning fireplaces. They are also packaged in plastic bags that block out moisture and require less frequent cleaning.
Like other heating systems, pellet stoves need to be properly size and vented. A professional technician will be able to evaluate your space requirements and venting requirements to ensure the best results.
During installation, the hearth is built to size and the vent is installed through a pre-cut hole in the siding of your home. The vent can then be run out the side wall or the roof, depending on your preference and local regulations.
After the hearth and vent are completed the pellet stove can be connected. Certain manufacturers provide a remote control that makes starting and maintaining the fire simple, while others have additional sensors that monitor combustion, airflow flue temperature, pressure. When the system detects that it needs more or less pellets, it tells the auger to accelerate or slow down in line with the need.
All stoves come with a storage container that can hold between 35 and 130 pounds of pellets. Hopper capacities determine the frequency at which the stove needs to be refilled with more hoppers, allowing longer intervals between refills. A grille draws air out of the room, passes it over the heat exchanger and then blows heated air into the living space via convection. A grate or auger spreads the pellets, and the pan beneath will collect any unburnt ones as well as the ashes of combustion.
While pellet stoves are more efficient than wood-burning models, they're not as efficient as natural gas furnaces or electric heaters. The electric components that drive their motorized parts require a power source which could cause problematic during an power outage, even though backup systems are in place for generators and batteries.
2. Low Maintenance
Pellet stoves are extremely efficient, but just like any major heating appliance they require some maintenance to ensure they are operating properly. Cleaning your stove and exhaust vent on a regular basis will help prevent the accumulation of harmful creosote. This can cause a fire or explosion that could damage your stove and/or house.
A pellet stove makes use of natural particles that are compressed (such as kernels, nutshells of corn, or small pieces of scrapwood) made from wood or other materials. An auger powered by electricity will feed the fuel pellets from a hopper into the burner and into the combustion chamber. The thermostat you set regulates the rate of pellets being fed to the burner. This allows the fire to remain roaring or modulate lower and even go out in accordance with the temperature you set. The ash is disposed of in an empty ash tray beneath the burner. This can easily be removed and then disposed.
Pellets are made from byproducts that would have been thrown away during the process of processing lumber. They are a renewable source and produce less dust than traditional wood-burning appliances making pellet stoves a cleaner heat source. The amount of carbon monoxide, carcinogens, and other harmful chemicals released from pellet stoves are also less than the latest EPA certified wood stoves.
These stoves aren't required to be vented through chimneys, as is the case with traditional wood stoves. Instead, they should be vented properly via a wall, or another exterior structure. Pellet stoves are equipped with flue ports on the top or rear of the appliance. They are connected to a ventpipe which extends out the house.
A pellet stove has one disadvantage: you have to purchase or store enough fuel pellets for the entire winter time. On average, owners of pellet stoves use three tons of pellets over the course of winter season at a cost of $200 per ton. These costs increase over time however, it's cheaper than purchasing and transporting firewood for an old-fashioned wood-burning fireplace or stove. You should buy enough pellets so that your stove can run through the winter's coldest months. Also, you'll must have a space to store the pellets (preferably dry and cool).
3. Reduced Carbon Footprint
Pellet stoves use renewable biomass fuels to generate heat, which reduces the need for fossil fuels that are finite. This reduces the carbon footprint and also helps diversify the sources of energy used in homes.
Even the most modern woodstoves that are EPA certified emit considerably less carbon dioxide than pellet stoves. pellet stove clearance sale from pellet stoves are also lower than those from gas furnaces. Pellets can be made from sawdust, bark, and other lumber remnants. They could also include corn, soybeans or agricultural waste. When they are burned, they emit less particles, which can cause respiratory problems and allergic reactions and carcinogens as well as nitrous dioxide.
The feed system is the major difference between pellet stoves and wood stove. Pellet stoves come with hoppers that hold the pellets. When the thermostat or sensors suggest that the room requires heating, the auger is turned and the pellets are fed into the combustion chamber where they are burned and generate heat. The combustion chamber's air is passed through a heat-exchanger that transfers heat to the blower. This process creates very low emissions, and creosote does not produced.
After the hopper has been emptied, the ash is removed by a cyclone, and deposited in an ash container. The stove is fitted with a fan that circulates warm, fresh air into the room. Most pellet stoves require minimal maintenance and come with a huge viewing area for you and your family to relax and enjoy the flames.
The most significant aspect that affects pellet stove emissions is the quality of the pellets. The poor quality pellets emit more emissions. When selecting your pellets, ensure that they are certified as meeting certain standards and don't contain other ingredients like petroleum-based or urea-based substances. Also look for a company who offers a warranty and will repair or replace components in case of a problem. Certain states provide homeowners with tax credits if they want to go even greener. This is a great opportunity to help offset the initial cost of this kind of stove and makes installation more affordable.
4. Reduced pellet stove clearance sale emit very little smoke or exhaust compared to fireplaces that burn wood. A fan is employed to spread heat more evenly across the room. This is among the reasons pellet stoves require much less maintenance than traditional wood stoves. While wood stoves need to be frequently cleaned of particulates and chemicals pellet stoves require the use of a special metal vacuum cleaner for routine cleaning.
Many manufacturers have designed their stoves so that they are simple to set up, operate and maintain. Their appliances come in different styles to match the design of your home. Some models come with a WIFI app, programmable thermostat and remote control.
Most pellet stoves come with an enormous fuel hopper, which can hold 35 to 130 pounds of pellets. The pellets are then pumped into the combustion chamber using an auger. The output of heat and the degree to which the fire gets depends on the speed at which pellets are fed to the burner. The hopper can be filled with hardwood pellets (from dense wood species such as oak and hickory) or softwood pellets (from pine and fir). A lot of stoves can use biomass pellets made of switchgrass and corn. This is a green option.
Pellet stoves produce less smoke and require less maintenance since they use less polluting fuel than wood-burning fireplaces. They also don't require a chimney, which makes them a much more suitable choice for new construction or retrofits.
Pellet stoves do not require regular cleaning of creosote and other chemicals similar to wood stoves. They require only periodic inspections to ensure proper operation and maintenance. This could include periodic cleaning and inspection of the ash or "clinker" as well as the motors and fans according to the model. Your appliance dealer can explain the proper procedure for the specific model and brand. He can also assist you to identify the right fuel for your stove and provide details on storage and safety.